I am trying to install a 40 GB ATA/100 Hard Drive on my BCM SQ575. Ive tried the BCM Forum and was told:
You can go to the hard drive forum at www.wimsbios.com and ask them to patch the latest BIOS for hard drive recognition to 128 GB. Read the forum rules before you post. If you go this route, after you've flashed the patched BIOS, you may have to use a utility from the support area of the hard drive manufacturer's web site to set the DMA mode to ATA33/UDMA2 in order for DMA to work in Windows (otherwise performance limitations).
The SQ575s IDE Ports do not work with ATA/100 also. Ive got a PCI Raid ATA/100 Controller in the computer and the drive is set to primary. When I turn on the computer the drive is not detected. So any ideas or suggestions?[/img]