80GB: 61-0816-001437-00101111-071595-ali1621-M726mrt_v1.2

BIOS update, EIDE card, or overlay software? (FAQ Hard disk recognition)
simbit
New visitors - please read the rules.
Posts: 9
Joined: Thu Jul 03, 2003 9:49 am

:oops:

OK, I eventually took the courage and flashed the bios. everything seemed to OK until it started to reboot.
After the memory check there is a long pause and then I get Pri HDD error message appears and ask me to go into set up. Press F1 to resume.

The trouble is I can't get past this point. Pressing F1 nothing happens, Pressing DEL on restart again has no effect. It carries on checking the ram and again comes back to HDD error message.

How do I get past this? I have ( I think) managed to save the the old bios. Can revert back to it and How?
Rainbow
The UniFlasher
Posts: 3122
Joined: Wed Mar 20, 2002 4:16 pm
Location: Slovakia
Contact:

Have you cleared CMOS after flashing BIOS?
Go into SETUP and set HDD paramters manually (16383 cylinders, 16 heads and 63 sectors per track).
Patched and tested BIOSes are at http://wims.rainbow-software.org
UniFlash - Flash anything anywhere
simbit
New visitors - please read the rules.
Posts: 9
Joined: Thu Jul 03, 2003 9:49 am

:D
Problem resolved.
Cleared the CMOS on the motherboard and rebooted. Both HDDs recognised.

Thanks all for your help
Post Reply