SUPERPOWER SP-P2BXA

BIOS update, EIDE card, or overlay software? (FAQ Hard disk recognition)
Post Reply
swimm3r
New visitors - please read the rules.
Posts: 5
Joined: Tue Jan 30, 2007 5:41 pm

Hello all
I have an old motherboard and I can't find any bios updates. It is made by SUPERPOWER, and they doesnt exist anymore.

03/03/1999-i440BX-W977TF-2A69KSH9C-00

Please help me

That's you
Top
cp
BIOS Guru
Posts: 1914
Joined: Mon Oct 21, 2002 9:07 pm
Location: Germany

patched up to 128GB:
http://wims.rainbow-software.org/rainbo ... 0128KB.zip

please read this, too:
http://www.wimsbios.com/phpBB2/topic8931.html
Top
swimm3r
New visitors - please read the rules.
Posts: 5
Joined: Tue Jan 30, 2007 5:41 pm

Thanks you, sir

I have a question. In the "User's manual", of the motherboard, I found BIOS Voltage 5V or 12V... (Bios Voltage Jumper Setting) when I'm writing BIN to the BIOS EEPROM I let 5V or swith to 12V?

Thanks again
Top
cp
BIOS Guru
Posts: 1914
Joined: Mon Oct 21, 2002 9:07 pm
Location: Germany

don't even dare to touch that jumper or you'll blow your bios chip up when you try to flash it!
Top
swimm3r
New visitors - please read the rules.
Posts: 5
Joined: Tue Jan 30, 2007 5:41 pm

that's a lot
Top
swimm3r
New visitors - please read the rules.
Posts: 5
Joined: Tue Jan 30, 2007 5:41 pm

with what sofware do I write the new bios??? please help me
thanks
Top
Denniss
BIOS Guru
Posts: 3153
Joined: Thu Mar 21, 2002 8:16 pm
Location: Near Hannover (CEBIT) Germany
Contact:
Contact Denniss

www.uniflash.org
Top
Post Reply

Return to “My hard drive isn't recognized”