i am now tryin to use a board with at290c02,
when i do flash bios image file to flash rom, it says mismatch bootblock. i choose to continue. uniflsh says last write status SUCESS.
if i exit and run uniflash again it says last write status NOT AVAILABLE.
Search found 10 matches
- Tue May 07, 2002 9:20 pm
- Forum: My motherboard is dead
- Topic: ms-6154 dead
- Replies: 15
- Views: 11675
- Tue May 07, 2002 2:28 pm
- Forum: My motherboard is dead
- Topic: ms-6154 dead
- Replies: 15
- Views: 11675
hey i found a mobo with AE29F2008 = Winbond W29C020(C) | 256KB, yet i still get a verification error in the end oh and what does bootblock mismatch mean ?
i did write bootbloc to file, and here it is
http://kr21.virtue.nu/BOOTBLOC.rom
i did write bootbloc to file, and here it is
http://kr21.virtue.nu/BOOTBLOC.rom
- Mon May 06, 2002 9:30 pm
- Forum: Other BIOS update issues.
- Topic: MS-6154 ver:2
- Replies: 3
- Views: 5964
- Mon May 06, 2002 8:35 pm
- Forum: My motherboard is dead
- Topic: ms-6154 dead
- Replies: 15
- Views: 11675
- Mon May 06, 2002 8:20 pm
- Forum: Other BIOS update issues.
- Topic: MS-6154 ver:2
- Replies: 3
- Views: 5964
MS-6154 ver:2
hi i have this ms-6154 board with a messed up bios, i want to hotflash the bios back again, i was wondering if u could help locate the bios.
- Mon May 06, 2002 6:43 pm
- Forum: My motherboard is dead
- Topic: ms-6154 dead
- Replies: 15
- Views: 11675
- Sun May 05, 2002 8:41 pm
- Forum: My motherboard is dead
- Topic: ms-6154 dead
- Replies: 15
- Views: 11675
- Sun May 05, 2002 12:24 pm
- Forum: My motherboard is dead
- Topic: ms-6154 dead
- Replies: 15
- Views: 11675
- Sun May 05, 2002 1:23 am
- Forum: My motherboard is dead
- Topic: ms-6154 dead
- Replies: 15
- Views: 11675
ms-6154 dead
:( ....i tried changing the bios this mornin http://www.msi.com.tw/support/bios/bios.php?model=MS-6154 using this method http://www.msi.com.tw/support/bios/ami_note.htm when i power it up noting comes, its jus a blank screen, no beeps i tried clearing the cmos, changed the jumpers, put them back. no...