BIOS Updates forum

CE# is pin 22 OE# is pin 24 WE# is pin 31 Connect RP# to 12V too to enable bootblock flashing See this http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/14727.pdf I'll try this as soon as I get my hands again on my SL-75KAV (I gave it to my friend), my current MBO has a PLCC c...

Thanks for the datasheet. But I don't know what to do with pins named CE#, OE#,RP#, WE# - there is no pins named similar on 32-pin chip datasheet. Should I connect them to the GND? Or something else? On my adapter diagram I have only a PCB layout and these pins "point" to nowhere and maybe they are ...

I made the Willem programmator 32-pin -> i28F002B adapter ( pdf ), but it does not work with my Soltek 75KAV MBO - it does not recognize the chip (I tried using Uniflash). Here you can see how does it look in reality (soldering, soldering, soldering... :)). <edit>I was soldering wires directly to 40...

During flashing with Award flash utility, flashing stopped and now the board is dead. Problem is that this board has 40-pin intel's i28F002B chip and I can't find anywhere similar board for hot-swap flashing. Only thing that seems possible to me is one of the programmators (like Willem programmator)...