BIOS Updates forum

Check whether your HDD has an 8GB-limiting clip on. Can't find any kind of a clip dooing this limitations, and even there was a place to put one on it, i think it was not installed, because as told the 13 Gb is dooing a great jod on an other pc. Non wathsoever change is made when disk came out that...

If the BIOS is detecting the 13GB hard disk as approx. 13GB then I would say the detections for those size drives are working fine and that what you see is what you will get for the 8GB drive. This is as yoy say OK, the 8Gb is seeen as 8 in the bios and the 13 is also seeen als an 13. If the 13GB d...

thank you so mutch. It was as you said. The whole line (command "no exe" line and filename) should be in the command. Again thank you. Now as i have made the flash and entered the latest bios, there is still al small problem. The range of the Harddisk. Seems to belimited at 8 GB I think it is 8 Gb c...

Hallo, I have a mainboard PCChips M754LMR. And tryed to flash using the flashUtilitie found at the PCC site, and the problem is that at the screen showes me error2: file does not exist. Strange, and looking for help because the file is at the floppy that is used to flash the bios. It is a bootable 1...

Tank you so mutch, i will give itb a try,


Maanse

everyting is connected as it should be.
I tryed the harddisk on an other motherboard and there it turnes well.

So, imo there must be something out there.

Tks for the reply,


But sorry i can't find it.
perhapst i am looking over it so please can't you give me a better or easyer way to find it.

I used the link yoy gave, but there i'm stocked

Hallo, I tryed to connect an 40 Gb disk to a HOT 591P Shuttle bord, but it is not reconised. Can somebody help me out here? The date showen at startup is: 01-04-00 The complete strig showen is: MVP-586B-ITE86-2A5LEH 2BC-00 The flash i used was 591ps025.bin tkx, Maanse PS, now the board is limitted a...

The link you passed works ok now, i will have a look at te brand and number of the available bios.

Feel sorry but i was hoping for the other answer.

Tkx anyway now i know i should find more mem on a stick.

Maanse

Also loking for the latest bios firmware.
Not so easy to find, all the links seems to be dead.
Any kind of help here?


Tkx again

Hallo,

On a Mb Hot 591P ae 4 banks to plug in ram mem.
Or 2 modules Sim or 2 modules of Dimm can be pluged in.
Is there a way to use al 4 banks at the same time and use more mem this way?

Tkx,


Maanse

major tkx,,
Maanse

Hallo,

I purpased a brand new motherbord.
Includet in the box was a flatcable to connect IDE disks.
Now there are 3 connectors at it, a blue, a gray, and a black, should i use a certain color for a certain divice?

Tkx Edwin, The changings you speak about, i tried them all, 3 motherbords, a dozen of cables, 6 HDD's, starting from 540 Mb upto 120 Gb. PC 100 ram memory parts, even PC 133 ram memory parts. Rare is these parts came out of other pc's working just fine. Bu t i will try the program you told about, ho...

Hallo, I am trying to rebuild a PIII /450 system Ussing older parts but it (the system to be build) is not working along. It is a Soyo Sy-6VBA133 bord having the latest (asfar as i know) flash (VBA-2BAB). On the board a PIII 450 Intel Cpu is ussed ant also recognised. The Mem modules tryed out are 1...