MB-8433/40 468

Hot-swapping and Boot-Block flash & Boot block flash and floppy support
Post Reply
iambadman
New visitors - please read the rules.
Posts: 1
Joined: Thu Jul 25, 2002 9:53 am

Hiho

one question, i have an old motherboard with an amd 468/100.
the motherboard is from biosstar named MB-8433/40.
on the official page is the note that i cant find there any bios updates for 468 pc`s. can anyone help me? need to flash the bios my harddisk etc. wont work correctly.

have anyone an idea where i can get a bios file for flashing it'?

thx for help
Denniss
BIOS Guru
Posts: 3153
Joined: Thu Mar 21, 2002 8:16 pm
Location: Near Hannover (CEBIT) Germany
Contact:

Please post your full Bios-ID !
I know of a 8433UUD but this board normally has a EPROM installed - not flashable .
This board should support up to 4GB or up to 8GB - anything higher supported with drive overlay software or with an Add-On UDMA Controller card(if you have PCI-Slots) .
edwin
The Hardware Archivist
Posts: 6273
Joined: Wed Mar 20, 2002 7:11 pm
Location: Netherlands
Contact:

IIRC the 14xx series is VESA, the 84xx series is PCI so an add-in controller is most likely the best option here.
edwin/evasive

Do not assume anything

System error, strike any user to continue...
Virtual Larry
New visitors - please read the rules.
Posts: 8
Joined: Thu Sep 05, 2002 6:17 am

Denniss wrote:Please post your full Bios-ID !
I know of a 8433UUD but this board normally has a EPROM installed - not flashable .
This board should support up to 4GB or up to 8GB - anything higher supported with drive overlay software or with an Add-On UDMA Controller card(if you have PCI-Slots) .
I have an 8433UUD, with a flash BIOS. I think the flash/EEPROM was a mfg. option. Let me know if you want a copy, I think it's Award 4.50PG.
Post Reply