A7N8X Deluxe BIOS prob

WaRhEaD_8472 · Wed Apr 28, 2004 6:50 pm

Hi,

I retracted an removable harddisk and rebooted.
Then the horror started...
"Award BootBlock BIOS v1.0" appeared as the first rule in the monitor.

It was an BIOS ROM checksum error.

It said to insert a system disk. So I did.
After that I found out that AWDFLASH.EXE is needed for the pc to work.
So, once again I grabbed my second pc and copied the file from the Asus site to a diskette.

*So far So good*

Now it tells me that the source file is not found.
So, for the second time I visited Asus there site and been gone to the download section for the 'A7N8X Deluxe'.
After a little research on the internet I discovered that I have revision 1.04.
No the best, but not the worst.
So, I download 'AN8D1007.ZIP' and extracted 'AN8D1007.BIN' out of it.
Also this file (the .BIN) was copied to the diskette.

Then I put the diskette in my computer to discover that the flash program still couldn't find the file...

After that I looked in the BIOS chip. It said: "AN8X2". So I downloaded the version for the v2.0. With the same result.

My question: Can somebody give me some info how to flash the BIOS?

Just to be complete: I can't get into DOS with a bootflop, so that doesn't work either.

HELP

lucske74 · Wed Apr 28, 2004 7:37 pm

I think You must have C18D1007.zip utility with the program with the tool awdflash.zip

http://www.asus.com.tw/support/download ... X%20Deluxe

If not try the lower biosupdate like 1005 or 1006 or the old one .

WaRhEaD_8472 · Wed Apr 28, 2004 8:15 pm

Thanks, but I already tried the next ones: (in no particular order)

aw1001c.zip
AN8D1007.zip
C18D1007.zip
C18B1007.zip
A8NC101D.zip
AW1001E.zip
C18X1009.zip
AN8B1007.zip
1007d_r1.zip
1007d_r2.zip

With that, I have tried the AWDFLASH.EXE v8.24B

Edit:
I quote from my BIOS chip:

AN8X2 1001.C
684E
GM G16

lucske74 · Wed Apr 28, 2004 9:08 pm

if you have the diskette in the disk drive , starts awflash immedly or must you tye first someone like this

This is for another board , but you must type like this

AWFL816.EXE W6340VMS.470

WaRhEaD_8472 · Wed Apr 28, 2004 9:22 pm

The BlockBios stops everything.
You (I mean: I) can only put a diskette with AWDFLASH.EXE in the drive, or else it's invalid.

This is the 'savegard' of Asus.

lucske74 · Wed Apr 28, 2004 9:36 pm

I know , but it whas example how you must do this .
I have also a Asus motherboard A7N8X-MX
there whas a CD rom with the exact bios file that came with the motherboard ,you can try that .
If you read your users manual ,there you find a lot of things you can do

WaRhEaD_8472 · Wed Apr 28, 2004 9:55 pm

An nice addition is the fact that the board was on a bargainsale... Without extra's...

But it would be very nice if you could e-mail me the biosfile that is on your cd. My e-mail address is warhead_8472@hotmail.com

lucske74 · Wed Apr 28, 2004 10:21 pm

Ok , I hope that you have the same chipset VIA KM400
I send the bios file to your hotmail adress

WaRhEaD_8472 · Wed Apr 28, 2004 10:31 pm

Thanks, I will take a look as soon as it's arrived.

Edit:
Nope, still nothing. But this one was expected... It was a different version.
Well, I hope my e-mail to Asus does some work for me.

I will post any updates.

PeteV · Thu Apr 29, 2004 2:20 pm

Hi!

How about having an AUTOEXEC.BAT on the booting diskette with just
one command in it, for example xxxFLASH.EXE xxxxxxxx.bin, noting
that the .bin should be exactly the right one for that mobo ...

With this .bat the diskette should boot and do the flashing automatically.

Regards,

Pete V.

BiosMan · Thu Apr 29, 2004 2:50 pm

Have you read the FAQ on how to do this posted elsewhere on this site??

WaRhEaD_8472 · Thu Apr 29, 2004 5:43 pm

I can't use the autoexec.bat because I cant boot. It just askes for AWDFLASH.EXE

And yes, I searched the whole forum, but people just helped themselves with anwsers I tried to use and failed.

Thu Apr 29, 2004 5:55 pm

Try awdblock from here http://www.wimsbios.com/phpBB2/viewtopic.php?t=4211
It's fake awdflash that will boot from the floppy and you can flash manually then.

Ritchie · Fri Apr 30, 2004 11:45 am

I have not come across before that a system will require a boot disk with AWDFLASH.EXE to boot.

I would try the following to be sure.

1) Disconnect all drives and drive cables completely except for your floppy drive.
2) Make a basic system disk under Windows 98 on another system by formatting a good, spare disk using the format utility and copy system files option.
3) Test this boot disk.
4) If the boot disk boots fine in step 3, try it on the machine you are describing.
5) If the boot disk does not boot in step 4, see if you can enter BIOS setup, load defaults, check the boot sequence to make sure drive A is listed and is first, then exit setup saving the new settings.
6) Try the boot disk again.
7) If step six now works, you do not have a boot problem requiring AWDFLASH.EXE. Try reconnecting your primary HDD and if it does not boot the boot information on that drive has a problem.

If you cannot boot with a boot disk after trying the above, I will then be more convinced of your situtation.

WaRhEaD_8472 · Fri Apr 30, 2004 5:42 pm

Alright, now I've booted in Win98 (bootdisk)
I tryed to use uniflash, but it keeps saying that the flash rom chip is unknown, organisation is unknown and pci chipset is nVidia nForce2