Asus CUSL2-C died because flash failure

Hot-swapping and Boot-Block flash & Boot block flash and floppy support
Post Reply
Nobodys Fool
New visitors - please read the rules.
Posts: 1
Joined: Sat Jul 10, 2004 2:13 pm

Hi there.

I wanted to flash BIOS of the CUSL2-C, I got a flash failore after erasing the EEPROM, so probably now I may have completely no BIOS on my board. It was not possible to try again flashing as long as the machine was running. Now at start mainboard is dead, except some beeps which are not documented.

Does the CUSL2-C already have any recovery options?
PeteV
BIOS Rookie
Posts: 51
Joined: Wed Apr 07, 2004 8:22 am

Hi!

Is your mobo/BIOS problem still actual?

Sure there is some "recovery" procedures/options for these type of cases. But please, first give some more details about your mobo, BIOS chip/code etc., what exactly happens on the re-boot trials, what have been your actions so far etc.


Best regards,

Pete V.
Post Reply