Asus P5n-mx bios crash

[tamcob]

I flashed my mobo's bios and it now doesn't boot any more

What can I do ?

1-It's a P5n-mx, Nvidia Chipset.
2-May I hotflash it on a different board.
3-It's eprom is 8 MB- can hot flash on a mobo with 4 Mb eprom.I mean can I plug my 8 MB eprom in a mobo working with one of 4 mb.
4-Will the trick of placing a flopy with the bios in works with asus boards, even if there's no beep nor keyboard led on


Thanks

I'l apreciate any help

[edwin]

1 made by Asus. How did you flash it what did you use from which website?
2 if the chip can be removed, most likely yes. uniflash or flashrom
3 you would need to know if that other board will support 8MB chips also. Personally, I would not risk it.
4 the bootblock method should also work on Asus board, i think they have an article in their FAQ section of the support.asus.com website

[tamcob]

No website or strange programs,I used the support CD suplied by asus and flashed from the very setup using asus crashfree2 embebed on it, bios version 07....or the like

Thanks.I'll read the FAQ righ now.

[edwin]

hmmm they should mention to always use the latest release version from the website. I don't understand why they even bother putting a version on the CD, it's bound to be outdated by the time the board reaches the enduser. Oh well, I hope they have a decent recovery tool.

[tamcob]

ok thanks again.I hope they have at least any tool.

[tamcob]

Ok thanks heaven my mobo came back to life....I'll explain later......

[edwin]

yes please, you might some other people facing the same or a similar problem.