blackscreen And computer wont boot up

Hot-swapping and Boot-Block flash & Boot block flash and floppy support
Post Reply
Takquar
New visitors - please read the rules.
Posts: 1
Joined: Thu May 01, 2008 6:49 am

Ok so here my problem i was messing around with my bios and change my ram from 2.5 to 3.0 now my screen went black and i can boot the computer is there a way to correct this as i dont really want to have to take it in to shop to get it fixed.

my motherboard is an elitegroup p4m800-m
if you need any other info just ask
oh the ram i have in there is 2.5 but stupidly didnt check that before i change it
edwin
The Hardware Archivist
Posts: 6286
Joined: Wed Mar 20, 2002 7:11 pm
Location: Netherlands
Contact:

Check the manual on how to reset the bios to defaults (clearing the cmos settings).
edwin/evasive

Do not assume anything

System error, strike any user to continue...
Post Reply