Dead mobo

Hot-swapping and Boot-Block flash & Boot block flash and floppy support
Post Reply
miccha4
New visitors - please read the rules.
Posts: 1
Joined: Fri Jul 02, 2004 10:28 pm

I've got a MSI mobo MS-6154 and done a wrong flash it seems.
My mobo is dead now so I can't use any of the drives.
Is there a way to get my mobo alive again so that I can flash the bios with the right update.

Thanks on advance,
Jan.
NickS
BIOS Bodhisattva
Posts: 3145
Joined: Fri May 03, 2002 10:34 am
Location: Thames Valley, UK

If the BIOS ROM is in a socket, your options are:
1. Have it re-programmed
2. Re-programme it yourself by "hot-swap" flashing (see the FAQ on the main website or check "Collected Wisdom")
3. Get a replacement chip from somewhere like www.badflash.com
Tested patched BIOSes. Untested patched BIOSes.
Emails *will* be ignored unless the subject line starts "Wim's BIOS forum"
PeteV
BIOS Rookie
Posts: 51
Joined: Wed Apr 07, 2004 8:22 am

Hi!

Is your BIOS flash problem still actual.

There may be some "recovery" procedure/options, but first after some more details are given by you.

Best regards,

Pete V.
Post Reply