Dead SM-P5Tx3 motherboard

Hot-swapping and Boot-Block flash & Boot block flash and floppy support
Post Reply
shantanu
New visitors - please read the rules.
Posts: 2
Joined: Tue Jun 11, 2002 3:17 pm

Hi all,
Could anybody please help me with the BIOS for the following motherboard.

I have a bad case of a BAD FLASH !!!

BIOS Date: 02/27/98
BIOS Type: Award Modular BIOS v4.51PG
BIOS ID: 02/27/98-i430TX-SMC60X-2A59IK1CC-00
BIOS Eval: SM-P5Tx3 Rev 1.2
Chipset: Intel Triton 430TX rev 1
Superio: SMC 602 rev 0 found at port 370h
Rainbow
The UniFlasher
Posts: 3122
Joined: Wed Mar 20, 2002 4:16 pm
Location: Slovakia
Contact:

Looks like Jamicon/Kaimei board. That info is from the original BIOS? What BIOS have you flashed?
Patched and tested BIOSes are at http://wims.rainbow-software.org
UniFlash - Flash anything anywhere
shantanu
New visitors - please read the rules.
Posts: 2
Joined: Tue Jun 11, 2002 3:17 pm

I have wrongly flashed my BIOS. Now my machine will not start AT ALL.
It just keeps beeping continuously.
What I need is the BIOS dump of the following BIOS :

BIOS Date: 02/27/98
BIOS Type: Award Modular BIOS v4.51PG
BIOS ID: 02/27/98-i430TX-SMC60X-2A59IK1CC-00
BIOS Eval: SM-P5Tx3 Rev 1.2
Chipset: Intel Triton 430TX rev 1
Superio: SMC 602 rev 0 found at port 370h
Rainbow
The UniFlasher
Posts: 3122
Joined: Wed Mar 20, 2002 4:16 pm
Location: Slovakia
Contact:

I can't find any BIOS for that board. The only BIOS for i430TX chipset and SMC60X Super I/O chip is for Totem TM-586TX4.
05/19/1998-i430TX-SMC60x-2A59ITJCC-00
TM-586TX4 Ver:1.2N

You can get it at http://www.totem.com.tw/down/tx4v12n.exe.
Patched and tested BIOSes are at http://wims.rainbow-software.org
UniFlash - Flash anything anywhere
ajzchips
El cheapo dude
Posts: 3048
Joined: Sat Mar 23, 2002 12:41 pm
Location: Madrid, Spain

sandubogdan@hotmail.com
chirtop_l@yahoo.com
l_cosmin@yahoo.com
techinfo@lista.sulinet.hu
adiloi@email.ro

(taken from: http://www.driverguide.com , etc. )

These people have posted recently regarding your exact same motherboard. They might still have the board, so I'd email them if I were you.
Post Reply