Dell 9000 435t Bricked

Hot-swapping and Boot-Block flash & Boot block flash and floppy support
Post Reply
fc227a
New visitors - please read the rules.
Posts: 3
Joined: Mon Feb 16, 2015 4:53 pm

Greetings all,


Is there any work around to flash the Bios in a Dell 9000 -435t . I was updating the bios and the system froze and well..............


I have another Bios chip on the way , But I was wondering if there was a work around ,So i can get in there and re-flash the Bios.
Top
fc227a
New visitors - please read the rules.
Posts: 3
Joined: Mon Feb 16, 2015 4:53 pm

Well, I installed a new Bios chip and it worked (Using the computer right now to write this post). But I entered the wrong asset tag number in the bios , DOH! .

Does anyone know a work around for that ?
Top
noel-man4
New visitors - please read the rules.
Posts: 14
Joined: Tue Oct 19, 2010 6:30 am

the Dell Asset Utility from the R109071.exe package can be used to edit or change the asset tag or service tag. But you need either a bootable floppy disk or bootable usb flash drive to run the asset tag tool because it is run in pure DOS mode.
Top
komodo25
New visitors - please read the rules.
Posts: 1
Joined: Sat Oct 10, 2015 10:07 pm

fc227a wrote:Greetings all,


Is there any work around to flash the Bios in a Dell 9000 -435t . I was updating the bios and the system froze and well..............


I have another Bios chip on the way , But I was wondering if there was a work around ,So i can get in there and re-flash the Bios.

hi could you tell me where i can order the bios chip, for this board and where is located on the motherboard?
thanks
Top
Post Reply

Return to “My motherboard is dead”