DFI AK47-EC rev.b2 bootblock problems.

Hot-swapping and Boot-Block flash & Boot block flash and floppy support
Post Reply
RaZZe
New visitors - please read the rules.
Posts: 3
Joined: Sun Feb 10, 2008 5:18 am

Hi,

I have problems with my motherboard.
After a bios update came Award BIOS boot block v1.0.

Then I have a bootable floppy disk created with AWDFLASH and correct Bios!

But bootblock shows the following error message:

! Error - Bad floppy sector FAT!
Or
! Error - AWDFLASH.EXE not found! ...

I have everything already tested what I found on google!
Nothing has helped.

What can I do?

Sorry 4 my bad english.iam german!

Tanks!
Top
KachiWachi
The New Guy
Posts: 1451
Joined: Fri Mar 29, 2002 10:32 pm
Location: Pennsylvania, USA

Is the floppy readable in another machine?
Top
RaZZe
New visitors - please read the rules.
Posts: 3
Joined: Sun Feb 10, 2008 5:18 am

yes it is...
Top
Noel
Master Flasher
Posts: 174
Joined: Wed Nov 02, 2005 4:00 pm
Location: Philippines
Contact:
Contact Noel

please try another one. hope this time you have success
Motherboard saved!
Top
RaZZe
New visitors - please read the rules.
Posts: 3
Joined: Sun Feb 10, 2008 5:18 am

another floppy dont work to.same error...:(
Top
KachiWachi
The New Guy
Posts: 1451
Joined: Fri Mar 29, 2002 10:32 pm
Location: Pennsylvania, USA

Bad floppy drive itself?
Top
edwin
The Hardware Archivist
Posts: 6286
Joined: Wed Mar 20, 2002 7:11 pm
Location: Netherlands
Contact:
Contact edwin

Sounds like it, transfer the working floppy disk/floppy drive to your problem machine. If that doesn't work the floppy controller on the board is gone and it's time for a replacement board...
edwin/evasive

Do not assume anything

System error, strike any user to continue...
Top
Post Reply

Return to “My motherboard is dead”