first post, please help

Hot-swapping and Boot-Block flash & Boot block flash and floppy support
Post Reply
mmmalas
New visitors - please read the rules.
Posts: 1
Joined: Tue Oct 21, 2003 2:48 pm

I had flashed my bios in a wrong way, when I try to boot, nothing come to the screen. so I ordered new preprgrammed chip. tried to use it but the same thing happen. just blank screen.

changed cpu, ram, gfx still does not work.

floppy dont power on

my system was working before the flash

Shuttle XPC SN45G (FN41/FN45) V1.0
1Gb twinmoss DDR400
AMD 2500+

can anyone help me :cry:
Denniss
BIOS Guru
Posts: 3153
Joined: Thu Mar 21, 2002 8:16 pm
Location: Near Hannover (CEBIT) Germany
Contact:

Clear CMOS

If you are able to force the board to run with 100MHz FSB via jumper then try this,too

Are you sure you installed and ordered the correct Bios ?
-> FN41 and FN45 should be two different Boards
Post Reply