Hi to all.
pls. help me to find a solution of my MOBO ECS K7VTA2 PRO. VER 3.1 because it has no. beep, and no display.. pls. give me an solution to figure out this problem.
My MOBO ECS K7VTA2 PRO. VER 3.1 HAS NO BEEP.
1) check the mainboard for visible damages
2) reset the cmos
3) measure the voltages (atx, vcore, vdimm, vchipset)
4) check if the cpu cooler gets warm (disconnect the cpu fan)
5) sell it on eb*y as untested ;)
2) reset the cmos
3) measure the voltages (atx, vcore, vdimm, vchipset)
4) check if the cpu cooler gets warm (disconnect the cpu fan)
5) sell it on eb*y as untested ;)
If you email me include [WIMSBIOS] in the subject.