Motherboard dead after shutting off while flashing BIOS

Hot-swapping and Boot-Block flash & Boot block flash and floppy support
Post Reply
Sergi_022
New visitors - please read the rules.
Posts: 1
Joined: Fri Jan 12, 2018 3:06 am

Fri Jan 12, 2018 3:15 am

Hi, i have a problem, i have a 945g-m4 and when i was trying to update my BIOS, the computer turned off while in progress, now the mobo, doesn't show anything, but it has some Clear CMOS jumper and a BIOS recovery one too, but without some help i dont know how to use it. Also I have the backup of the good BIOS. Someone that can help me?
Here some info about my mobo: http://lame2.no-ip.com/algol/Srv_TECH/T ... %20450.htm
Thanks in advice
edwin
The Hardware Archivist
Posts: 6215
Joined: Wed Mar 20, 2002 7:11 pm
Location: Netherlands
Contact:

Tue Feb 20, 2018 5:52 pm

under the NEC sticker is an ECS motherboard. some info on performing a recovery procedure on those:
motherboard-dead-f30/ecs-board-dead-aft ... 12246.html
edwin/evasive

Do not assume anything

System error, strike any user to continue...
Post Reply