i recently got this motherboard of the internet i was given this information.
"PART NUMBERS ARE ASSEMBLY NUMBER 253242-002 SPARE PART NUMBER 277498-001"
"NEW PENTIUM 4 478 PIN TYPE 400 FSB RUNS UP TO 2.8 PENTIUM 4 WITH NO PROBLEM 3 DIM SLOTS 3 PCI SLOTS AND A AGP SLOT 2 X USB AND AUDIO.
PART NUMBERS ARE ASSEMBLY NUMBER 253242-002 SPARE PART NUMBER 277498-001
CPU REQUIREMENTS ARE ANY 400 FSB P4 MEMORY IS STANDARD GOOD QUALITY PC133 SD=RAM.
THESE TAKE THE P4 24 PIN PSU THAT IS QUITE COMMON THESE DAYS.
THESE ARE PRIMARILY FOR THE COMPAQ EVO W4000 HIGH END DESKTOP BUT WILL FIT MANY OTHER CASES.
THEY ARE STANDARD ATX FORMAT BUT CHECK PIC ON I/O OUTPUTS"
I cant seem to get it to turn on becuase i cant figure out the LED side can anyone help me?? I have been playin around with this for weeks now.
Please i need your help!!!
MotherBoard Help Needed Please!!!!
-
andersbrink
- New visitors - please read the rules.
- Posts: 1
- Joined: Sun Jan 29, 2006 1:35 am
If the connector is named "P5", check out page 143 in http://h20000.www2.hp.com/bc/docs/suppo ... a-wwen.pdf
I was in the very same situation, that info was VERY hard to find. Darn HP! Darn Compaq!
I was in the very same situation, that info was VERY hard to find. Darn HP! Darn Compaq!
hi,
i have the same problem. but i have had that manual before and connected the power switch to P5 pin 6&8 according to the manual. i still have no success to start the computer. if i force the powersupply to deliver power by putting the "power on" on GND i have the keyboard light flashing up and the 2 LED's on the mainboard, but still no system start. any help would be great.
Jan
i have the same problem. but i have had that manual before and connected the power switch to P5 pin 6&8 according to the manual. i still have no success to start the computer. if i force the powersupply to deliver power by putting the "power on" on GND i have the keyboard light flashing up and the 2 LED's on the mainboard, but still no system start. any help would be great.
Jan
-
cooperjohnr
- New visitors - please read the rules.
- Posts: 1
- Joined: Sat Nov 03, 2007 9:35 pm
Scottyboy600 -scottyboy600 wrote:i recently got this motherboard of the internet i was given this information.
"PART NUMBERS ARE ASSEMBLY NUMBER 253242-002 SPARE PART NUMBER 277498-001"
"NEW PENTIUM 4 478 PIN TYPE 400 FSB RUNS UP TO 2.8 PENTIUM 4 WITH NO PROBLEM 3 DIM SLOTS 3 PCI SLOTS AND A AGP SLOT 2 X USB AND AUDIO.
PART NUMBERS ARE ASSEMBLY NUMBER 253242-002 SPARE PART NUMBER 277498-001
CPU REQUIREMENTS ARE ANY 400 FSB P4 MEMORY IS STANDARD GOOD QUALITY PC133 SD=RAM.
THESE TAKE THE P4 24 PIN PSU THAT IS QUITE COMMON THESE DAYS.
THESE ARE PRIMARILY FOR THE COMPAQ EVO W4000 HIGH END DESKTOP BUT WILL FIT MANY OTHER CASES.
THEY ARE STANDARD ATX FORMAT BUT CHECK PIC ON I/O OUTPUTS"
I cant seem to get it to turn on becuase i cant figure out the LED side can anyone help me?? I have been playin around with this for weeks now.
Please i need your help!!!
Did you ever find the solution to powering up this board?
I just bought one and you are the only google reference for these spec.
Edit - Fixed quoting and removed personal e-mail info to prevent SPAM. KW
