my MSI K7N420 Pro wont boot

Hot-swapping and Boot-Block flash & Boot block flash and floppy support
Post Reply
Sh4rk
New visitors - please read the rules.
Posts: 3
Joined: Sat Apr 27, 2002 11:07 pm

ok, here is what I did, I went into my Award Bios and selected "Frequency/Voltage Control" then in "CPU FSB/DDRAM/AGP CLOCK" and changed the setting from "100/200/66" to "133/200/66"

saved, and then all of the sudden my monitor didnt turn on anymore, so I check my monitor, it was fine, then I checked my DDRAM and it was fine, then I checked my CPU and it was fine too. I cleared my CMOS and removed the battery but still it doesnt work

do you maybe have any other suggestion on what I can do ?
Sh4rk
New visitors - please read the rules.
Posts: 3
Joined: Sat Apr 27, 2002 11:07 pm

ok, I read abuot this putting files on disk and try that....is that maybe possible?? and when yes, what do I have to put on the disk for K7N420 Pro??
Denniss
BIOS Guru
Posts: 3153
Joined: Thu Mar 21, 2002 8:16 pm
Location: Near Hannover (CEBIT) Germany
Contact:

Reset your Bios with Clear CMos - read your manual how to do that !
Sh4rk
New visitors - please read the rules.
Posts: 3
Joined: Sat Apr 27, 2002 11:07 pm

I already did all that...cleared CMOS and EVERYTHING (I already had a post abuot that)

now I wanna try this wiht the BOOT-BLOCk
Post Reply