P2b-S + bp4rc_f + uniflash = dead w/ flashing kb lights

[stonent]

I had thought I had already flashed this board. But the date was 1998 so I downloaded the 1014s.003 bios and patched it and flashed it w/ bootblock. Now the system comes on with all 3 keyboard lights flashing on and off w/ no display.

I've used the above combo before on many other boards with no issues so I found it strange that it failed. I'm going to hot flash a new one, just strange that this happened.

[Denniss]

Hold down the "-" key(while powering on the system) next to the number block on the right side of your keyboard - this should temperarily disable the modification by the patcher using the original Bios to boot

[stonent]

I ended up hotflashing the normal 1014s.003 bios. Just strange as I've had so much success with applerom's utilities before.