p4sdx become dead

Hot-swapping and Boot-Block flash & Boot block flash and floppy support
Post Reply
Rehbar
BIOS Newbie
Posts: 22
Joined: Wed Nov 15, 2006 9:05 am

hi users'
i have asus mainboard p4sdx. I install processor, ram, and vga
then i turn on it. It show display then i short pins of "restart" for
restart system it dos't show any display. I power off it and then start it.
It dos not show display it also dos not give any beep too.

Now what i do?
is it's bios dead? I also test processor ram and vga on other board these work fine on it.
Rehbar
BIOS Newbie
Posts: 22
Joined: Wed Nov 15, 2006 9:05 am

Y not reply me?
KachiWachi
The New Guy
Posts: 1451
Joined: Fri Mar 29, 2002 10:32 pm
Location: Pennsylvania, USA

What pins did you "short"?
Rehbar
BIOS Newbie
Posts: 22
Joined: Wed Nov 15, 2006 9:05 am

i short "reset" pins .
KachiWachi
The New Guy
Posts: 1451
Joined: Fri Mar 29, 2002 10:32 pm
Location: Pennsylvania, USA

OK.

To me, it sounded like you shorted the pins of some component...instead of pushing the "reset" switch. :wink:

You'll have to go through one component at a time to see what is going on here I'm afraid.

Thanks.
Post Reply