Please advise: Asrock P4VM800 bad flash, power went out!

Hot-swapping and Boot-Block flash & Boot block flash and floppy support
Post Reply
theloser
New visitors - please read the rules.
Posts: 2
Joined: Tue Oct 03, 2006 6:27 pm

Hello.

My Asrock P4VM800 suffered a "bad flash" well actually the power went out during flashing (total freak outage, downed telephone poll).

Should of had it hooked up to UPS :(

Never hot-flashed but I'm extremely computer hardware (and software) literate.

Should I use uni-flasher?

Also whether I use uni-flasher or something else, do I have to re-name the bios file from P4VM80_1.60 to something else.

Thanks in advance for any help provided. :)
Top
edwin
The Hardware Archivist
Posts: 6286
Joined: Wed Mar 20, 2002 7:11 pm
Location: Netherlands
Contact:
Contact edwin

http://www.uniflash.org has both the tool and the info. Check if uniflash is compatible with the transfer board chipset and if there are any gotcha's for the bios chip.
edwin/evasive

Do not assume anything

System error, strike any user to continue...
Top
theloser
New visitors - please read the rules.
Posts: 2
Joined: Tue Oct 03, 2006 6:27 pm

Thanks.

The transfer board is a MSI k7n420 (n-force2) so it looks like to me, uniflasher "might" work...

Any other ideas?
Top
Post Reply

Return to “My motherboard is dead”