pmc pm49fl004 3.3v 512

Hot-swapping and Boot-Block flash & Boot block flash and floppy support
Post Reply
organic_matter
New visitors - please read the rules.
Posts: 10
Joined: Sat Apr 14, 2007 9:41 am

flashing bios on a dead a8ae-le asus board with the above mentioned chip using uniflash i get a error during verification on the 2 of the latter sectors. could the resemble corruption of the chip? of a write protection?is there another flash tool that will flast a pm49fl004? any sugestion...
organic_matter
New visitors - please read the rules.
Posts: 10
Joined: Sat Apr 14, 2007 9:41 am

only get one error doing it in without boot block


.......... cleared cmos still some result...
.................discharged residual energy still same result....
.....................tried different rom still same result.................
organic_matter
New visitors - please read the rules.
Posts: 10
Joined: Sat Apr 14, 2007 9:41 am

the reason this board died was a flash gone wrong with 3.14. so when i tried to fix it with 3.13 it wouldn't wright over the two sectors that had the 3.14 on it because it was newer. so i flashed 3.14 and it worked........ but some info on my new post would be helpful
Post Reply