Problems with bios after flash

Hot-swapping and Boot-Block flash & Boot block flash and floppy support
Post Reply
rzombie
New visitors - please read the rules.
Posts: 1
Joined: Wed Feb 23, 2011 1:13 am

My problem start's with my hard drive 80gb only recognize 30gb i also change the jumpers but without sucess so i research on web and i find out that i have to flash my bios "AWARD MODULAR BIOS V 4.51PG" to my motherboard "SHUTTLE HOT-661V" so i find out on this website the update to my bios http://wims.rainbow-software.org/index. ... 0&count=40 i put the files on the diskette the AWDFLASH and the 661VSO45, when i run i have save the old bios on another diskette then i run the program it did everything alright then it say press F10 to exit i press then it show everything black i turn off the computer then when i turn on but doesn't show anything on the screen "black screen" and no beeps and it freeze the keyboard nothing else, i already take off the cmos battery and put it again but it does the same thing, could anybody help me?
edwin
The Hardware Archivist
Posts: 6286
Joined: Wed Mar 20, 2002 7:11 pm
Location: Netherlands
Contact:

can you please send the old bios to edwin@wimsbios.com or elhvb@hotmail.com so I can verify you indeed had the retail 661V board before.
edwin/evasive

Do not assume anything

System error, strike any user to continue...
Post Reply