Shuttle Ak12 v 3.0 problem

Hot-swapping and Boot-Block flash & Boot block flash and floppy support
Post Reply
Speed666
New visitors - please read the rules.
Posts: 3
Joined: Sat Jul 13, 2002 8:46 pm

After flash on tho mobo and restar system my speaker only beeps (1 tone i 1 second for a long time).
What the hell is this?
Please help !!!!!
THX
NickS
BIOS Bodhisattva
Posts: 3145
Joined: Fri May 03, 2002 10:34 am
Location: Thames Valley, UK

Are you sure you used the right BIOS to flash the board ?
Did you clear the CMOS afterwards ?
Tested patched BIOSes. Untested patched BIOSes.
Emails *will* be ignored unless the subject line starts "Wim's BIOS forum"
Speed666
New visitors - please read the rules.
Posts: 3
Joined: Sat Jul 13, 2002 8:46 pm

Yes and stil nothing
Do you know anything else?
THX
Rainbow
The UniFlasher
Posts: 3122
Joined: Wed Mar 20, 2002 4:16 pm
Location: Slovakia
Contact:

Does it try to read from floppy?
Patched and tested BIOSes are at http://wims.rainbow-software.org
UniFlash - Flash anything anywhere
Speed666
New visitors - please read the rules.
Posts: 3
Joined: Sat Jul 13, 2002 8:46 pm

No It does not read from floppy...
I don't know why?
When i plugged bios from otgher mobo that works fine it still beeps.
On my friend mobo helped taking off the battery for 24 hours.
On my mobo it doesn't help.... :(
Any sugesstions?
Post Reply