Bios not ACPI compliant - Windows 2000 server install

Don't ask how to hack password. (BIOS Passwords)
Post Reply
paulfoel
New visitors - please read the rules.
Posts: 6
Joined: Thu Aug 06, 2009 3:06 pm

On laptop with AMIBIOS R2-03, I get the following blue screen error at the start of Windows 2000 server install:-

Code: Select all

*** STOP: 0x000000A5 (0x0000000D,0x82F95008, 0x4449555F, 0x00000000)" 
A problem has been detected and windows has been shut down to prevent damage to your computer. 
If this is the first time you 've seen this Stop error screen restart your computer. If this screen appears again, follow these steps: 
The BIOS in this system is not fully ACPI compliant. Please contact your system vendor or visit hardware-update for an update BIOS. If you are unable to obtain an updated BIOS or the latest BIOS supplied by your vendor is not ACPI compliant, you can turn off ACPI mode during text mode setup. To do this, simply press the F7 key when you are prompted to install storage drivers. The system will not notify you that the F& key was pressed - itwill silently disable ACPI and allow you to continue your installation. 
Tried hitting F7 as it suggests. Install seems to go a bit further but then fails because setup cant find the keyboard !!!!
edwin
The Hardware Archivist
Posts: 6286
Joined: Wed Mar 20, 2002 7:11 pm
Location: Netherlands
Contact:

What is the make and model of this laptop?
edwin/evasive

Do not assume anything

System error, strike any user to continue...
paulfoel
New visitors - please read the rules.
Posts: 6
Joined: Thu Aug 06, 2009 3:06 pm

edwin wrote:What is the make and model of this laptop?
Its a twinhead S15S (wwwtwinheadcom) hardcase pro.
Post Reply