Hello All,
How i could flash IBM thinkpad without charge battery? I download from IBM website and here are the files:
ansi.sys
config.sys
ff40.exe
ibmbio.com
ibmdos.com
iflash.exe
iflash.r01
msg.dat
Na2_a6e.bin
pass_chk.exe
ngn2vpd.exe (VPD data write for IBM Nagano2)
runme.com
sbread.exe (smart battery reading tool)
If you guys could teach me how to flash i reallly appriciate. Also, I DO KNOW the risk. Below are the specs:
Thinkpad 1400 2621 49A i series
P3 500MHz 128MB 12GB HD Toshiba 6X DVD.
Million Thanks in Advance
IBM Thinkpad 1400 flash bios without battery
Ello Edwin, thanks for the reply
Forgot to mention to you that i do connect to AC power supply, but the battery totally dead. when i flashing the bios using IBM tool, it keep saying that i need >20% recharge battery. Also, i tried recharge the battry overnite, still 0%.
Forgot to mention to you that i do connect to AC power supply, but the battery totally dead. when i flashing the bios using IBM tool, it keep saying that i need >20% recharge battery. Also, i tried recharge the battry overnite, still 0%.