Katch wrote:Ok here they are - I'll repost the first one too so they're together.
Speedstep Mod For 600MHz MMC-2 Props to Sharedoc for this mod!
I have made SpeedStep mod and it has earned at once!!!
My results:
http: / / w ww.metacom.ru/~alexmorg/CPU/done_1.jpg
http: / / w ww.metacom.ru/~alexmorg/CPU/done_2.jpg
http: / / w ww.metacom.ru/~alexmorg/CPU/CPU_650.jpg
http:/ / w ww.metacom.ru/~alexmorg/CPU/CPU1_650.jpg
My results of PassMark benchmark you can see http : / /
www.metacom.ru/~alexmorg/CPU/PassMark.rar
But power consumed by the processor was too big and achieved 30 watts!!!
That forced the processor to be heated almost up to 100 C!!!
All was necessary to me desoldering R5 to lower a voltage on the processor that has allowed to reduce power consumed by it a little.
I use PC Wizard 2004 for definition of characteristics of the processor and system as a whole.
Up to desoldering R5 the voltage on the processor was 1.8 volts, but also the ambassador desoldering it remained former, - 1.8 volts though power and temperature of the processor have appreciablly decreased!
Please, advise any program for exact definition of a voltage on the processor.
Or, prompt where it is possible to measure a voltage on the MMC-2 module or MotherBoard.
Thanks!
-Alex