I becom a tip from a user to contact this board an user cp.
I have a Gericom Blockbuster Excellent 5000 1440 255TI3
I had some time ago brought a bigger CPU and the Celeron 1400 against a 2.1 GHz Pentium M changed. The bios now also recognizes the right CPU with a full bar. At least the bios shows the correct values. It runs but generally only with 600MHz. In the Bios, I can not recruit and the various Speddstep-Programmke for Windows also refuse. I've times with a 1,7 GHz Pent.M tested, and it's great.
I've got my times with MMtoolangesehen Bios and it is my CPU while inside but with other auditors. The CPU is a Pentium M Dothan CPUID 06d8 and revision C0. The bios knows but only 20th revision
Now the question. Can the micro-code or the patch is required with mmtool paste? Where can I get a matching file?
Patch or who my Bios fit for this?
problems with CPU, not correct on bios Gericom Notebook
-
- The Hardware Archivist
- Posts: 6286
- Joined: Wed Mar 20, 2002 7:11 pm
- Location: Netherlands
- Contact:
I think this is about his current bios not entirely recognizing the Pentium M 2.1, the thing about the 20th revision might indicate revision 20 of the bios does indeed recognize it, all that has to be done is update the bios.
edwin/evasive
Do not assume anything
System error, strike any user to continue...
Do not assume anything
System error, strike any user to continue...
-
- New visitors - please read the rules.
- Posts: 3
- Joined: Wed Nov 12, 2008 11:53 am
my bios is already the newest from gericom.edwin wrote:I think this is about his current bios not entirely recognizing the Pentium M 2.1, the thing about the 20th revision might indicate revision 20 of the bios does indeed recognize it, all that has to be done is update the bios.