Siemens Mobile 700 Bios recover

Don't ask how to hack password. (BIOS Passwords)
Post Reply
sparc
New visitors - please read the rules.
Posts: 2
Joined: Fri Feb 07, 2003 8:08 pm

Hi all,

and yes, the nb (5 years, the last 2 in a 'deep sleeping mode') is dead. W95 without hardware errors.
After a flash with original ugbiosfe.exe the screen stay black, only a short floppy action (bootloader, 1s).

I've tried all well known names for the bios file, boot floppy
with autoexec.bat (ugbiosfe /s bios.bin - from the Siemens Hotline)
- no sucess.
Time is to short to read the image, floppy sounds like a short search.

Phoenix NoteBios 4.xx I believe. Bios chip is a AM29F002T.

What can I do? Using a other flashtool (uniflash)?

Sparc
Rainbow
The UniFlasher
Posts: 3122
Joined: Wed Mar 20, 2002 4:16 pm
Location: Slovakia
Contact:

Phoenix BIOSes require special recovery disk. I've seen a utility (crisisdisk.bat, makeboot.exe and some other things) to create it included with some Daewoo BIOS (I have it somewhere).
Patched and tested BIOSes are at http://wims.rainbow-software.org
UniFlash - Flash anything anywhere
sparc
New visitors - please read the rules.
Posts: 2
Joined: Fri Feb 07, 2003 8:08 pm

Sounds not so bad. How can I get the necassary disk/files?
Or a example to create by myself.

I've ask the german hotline for the CRISIS Disk,
but I get no answer. Google has also not found something about.

Rainbow, if possible please look for the disk you have.

Thanks

Sparc
Rainbow
The UniFlasher
Posts: 3122
Joined: Wed Mar 20, 2002 4:16 pm
Location: Slovakia
Contact:

Sent. Be sure to replace the BIOS image inside with BIOS for your computer before using it.
Patched and tested BIOSes are at http://wims.rainbow-software.org
UniFlash - Flash anything anywhere
Post Reply