Upgrading from pii to piii, thinkpad 600e

Don't ask how to hack password. (BIOS Passwords)
Post Reply
spacemaggot
New visitors - please read the rules.
Posts: 3
Joined: Fri Dec 21, 2007 1:34 am

Sharedoc.....was wondering if you could post a set of instructions for upgrading from the original pii to a 600mhz piii on my tpad 600e- I don't want to overclock it... just looking for a list of your most successful steps...thanx in advance... if not... thanx anyway
Sharedoc
Notebook Genius
Posts: 679
Joined: Mon Aug 18, 2003 8:46 pm
Location: Finland

spacemaggot
New visitors - please read the rules.
Posts: 3
Joined: Fri Dec 21, 2007 1:34 am

Thanx!!! Let you know how things go.....
spacemaggot
New visitors - please read the rules.
Posts: 3
Joined: Fri Dec 21, 2007 1:34 am

Sharedoc- just wanting some clarification on the mod.... first.. what's a "folio"? Second, am I to jump from pin 25 to pin 48 with the resistor AND desolder pin 25 from the board, or just put the resistor in and leave pin 25 connected to the main board? Thanks...I'm waiting for an extra mother board before I attempt this- those surface mount components are a bitch!
Again, thanks for the info and have a Merry Christmas...or Hanukah...or Kwanza...whichever the case may be.
Sharedoc
Notebook Genius
Posts: 679
Joined: Mon Aug 18, 2003 8:46 pm
Location: Finland

Folio = conductive layer on printed circuit board.
Post Reply