3slap board problem

Questions that don't belong in the other forums.
Post Reply
karachi
New visitors - please read the rules.
Posts: 7
Joined: Sat Mar 12, 2005 11:59 pm

Hi Kuriaki,
This for the second time i need your help. You've also assist me with my slap3 or 3 slap main board bios upgrade coz my 80 GB baracudda disk drive was troubling that time. After four or three months, after upgrading successfully your suggested bios everything is working fine and i'm fan of you (KURIAKI), now its giving me cmos checksum error. I replaced the battery with new one but i usually gives the error "CMOS checksum error"
i think i need to rewrite the bios. I've the files but i dont know which one is correct one. one of them is 2k3s.rom and another is 010222s.rom. if you give me the source address then i'll be thankful to you.
After that bios upgrade my system start giving me a bilboard screen name "FIRST MAINBOARD". Any suggestion???

Regards

Karachi.
Top
Denniss
BIOS Guru
Posts: 3153
Joined: Thu Mar 21, 2002 8:16 pm
Location: Near Hannover (CEBIT) Germany
Contact:
Contact Denniss

Go into Bios and load the Setup/Performance Defaults/settings then exit the Bios. This should save the new settings and CMOS error shoudl disappear.
Top
Post Reply

Return to “Other BIOS update issues.”