MS 7065 v.1 BIOS Fail

Questions that don't belong in the other forums.
Post Reply
People321
New visitors - please read the rules.
Posts: 7
Joined: Sat Jun 16, 2012 3:46 am

Winuniflash 1.4 used and now no bios. PC just works, noscreen. Can I do anything? :cry:

To update the BIOS, but the computer does not work anymore. Just makes 8 beeps and remains employed. I can not get back to the BIOS in any way? Trashing the motherboard? I did restart and that was it. Whether I was able to upgrade the BIOS?

Before I got the hard disk, the BIOS somehow changed my settings to NVRAM Clean http://guides.macrumors.com/Resetting_The_NVRAM guess. I thought that the old BIOS, updated, and so it went on.

I had the same motherboard and Flash winuniflash its 7065 v1.23. I put a checkmark Clear cmos.Ma guess that's why it does not operate the thing. I did restart and that was it.
edwin
The Hardware Archivist
Posts: 6286
Joined: Wed Mar 20, 2002 7:11 pm
Location: Netherlands
Contact:

what other hardware is in the machine? is this a branded system or a homebuilt one?
edwin/evasive

Do not assume anything

System error, strike any user to continue...
People321
New visitors - please read the rules.
Posts: 7
Joined: Sat Jun 16, 2012 3:46 am

edwin wrote:what other hardware is in the machine? is this a branded system or a homebuilt one?
Here is computer details
I think it is MSI HETIS 865GV-E Barebone PC

http://rghost.net/private/40175665/d705 ... aa55697597

Image
edwin
The Hardware Archivist
Posts: 6286
Joined: Wed Mar 20, 2002 7:11 pm
Location: Netherlands
Contact:

That is the proper bios for this board. I think there's a different issue that could explain your nvram settings message.

Please check your board for bad capacitors. See for more information http://www.badcaps.net

I think it has this issue.
edwin/evasive

Do not assume anything

System error, strike any user to continue...
People321
New visitors - please read the rules.
Posts: 7
Joined: Sat Jun 16, 2012 3:46 am

edwin wrote:That is the proper bios for this board. I think there's a different issue that could explain your nvram settings message.

Please check your board for bad capacitors. See for more information http://www.badcaps.net

I think it has this issue.
Everythings ok. :roll: I look capacitors and no see any leaks. I have other motherboard bad capacitors and they leaks. I change capacitors and motherbord ok. I can not find anywhere BIOS.rom original file (V1.1)? May be able to re-flash. 8 beep code says that the video card error? I read that it is possible to re-Flashing the BIOS. Was renamed the valley. AMIBOOT.ROM and Flash. Unfortunately, the computer does not have a picture of. Whether it is possible?
edwin
The Hardware Archivist
Posts: 6286
Joined: Wed Mar 20, 2002 7:11 pm
Location: Netherlands
Contact:

http://nl.msi.com/service/download/bios-7142.html

the A7065ims.123 in that zip file IS the bios.rom that you need.
edwin/evasive

Do not assume anything

System error, strike any user to continue...
People321
New visitors - please read the rules.
Posts: 7
Joined: Sat Jun 16, 2012 3:46 am

edwin wrote:http://nl.msi.com/service/download/bios-7142.html

the A7065ims.123 in that zip file IS the bios.rom that you need.
That's what I did. And that was a mistake. :roll: I did something wrong?
Ok. I will try out if it success.
Thanks!
edwin
The Hardware Archivist
Posts: 6286
Joined: Wed Mar 20, 2002 7:11 pm
Location: Netherlands
Contact:

Do you have a PCI video card to test with? Can be the initial video option is set to add-in PCI card. And try changing the position of the RAM chip, sometimes the onboard video doesn't work if you only fill the slot that is seen as nd RAM slot...
edwin/evasive

Do not assume anything

System error, strike any user to continue...
Post Reply