Ami Bios flash required

Questions that don't belong in the other forums.
vipulgos
New visitors - please read the rules.
Posts: 11
Joined: Sun Feb 11, 2007 8:04 pm

I'll not THINK more,
just tell me whether this bios allow me to install winxp on my computer
edwin
The Hardware Archivist
Posts: 6286
Joined: Wed Mar 20, 2002 7:11 pm
Location: Netherlands
Contact:

http://www.microsoft.com/windowsxp/pro/ ... sreqs.mspx
Here's What You Need to Use Windows XP Professional


PC with 300 megahertz or higher processor clock speed recommended; 233 MHz minimum required (single or dual processor system);* Intel Pentium/Celeron family, or AMD K6/Athlon/Duron family, or compatible processor recommended


128 megabytes (MB) of RAM or higher recommended (64 MB minimum supported; may limit performance and some features)


1.5 gigabytes (GB) of available hard disk space*


Super VGA (800 x 600) or higher-resolution video adapter and monitor


CD-ROM or DVD drive
edwin/evasive

Do not assume anything

System error, strike any user to continue...
admin
Site Admin
Posts: 760
Joined: Wed Mar 20, 2002 12:14 pm
Location: Belgium
Contact:

You'll have install Windows XP on your PC to see if it will work with your M/B.
No pc is the same so it's difficult to predict.

Please let us know the results of your tests!

kind regards,
Wim
vipulgos
New visitors - please read the rules.
Posts: 11
Joined: Sun Feb 11, 2007 8:04 pm

Dear sir,
I've tried to install winxp, but it seems doesn't work
Eventhough i've first boot device is CD ROM, and winxp with SP2 CD is in CD ROM, on start up it gives error message as:

No boot information found. My CD is o.k.
I re-collect that before sometime i manage to get winxp installation starts, but it doesn't completes, but today it has been seen that no strating of winxp either.
Post Reply