bios baterry change

Questions that don't belong in the other forums.
Post Reply
burim
New visitors - please read the rules.
Posts: 2
Joined: Tue Aug 17, 2010 5:45 pm

My onboard LAN port was crashed yesterday. Also from some month ago when I start PC show these messages Flopy failed... Pres F1 to continue, and in Windows change my date/time.

Yesterday I buyed a new PCI LAN card and a new cmos battery. And I have put in same time two components. When I power on pc, nothing is displayed in monitor. Fans work. Hdd light all time display. DVD-rom all time make some trying to read.

Today I change cmos jumper pin for about 1-2 hours and replace to default, and the PC start, but with messages: Pres f1 to continue, and changed date/time. I work some time, I installed driver for LAN card who work ok, and power off pc. After 2-3 hours when I try to power on again the pc wont start, same issue!!!

Please help me
edwin
The Hardware Archivist
Posts: 6286
Joined: Wed Mar 20, 2002 7:11 pm
Location: Netherlands
Contact:

sounds like bad capacitors in the power supply or on the motherboard to me

http://www.badcaps.net

to see what I'm talking about.
edwin/evasive

Do not assume anything

System error, strike any user to continue...
burim
New visitors - please read the rules.
Posts: 2
Joined: Tue Aug 17, 2010 5:45 pm

edwin, when I remove at all the cmos jumper, pc start, but with some erros (press F1..., LAN card is not detected, wrong date, etc.)
Post Reply