If anyone has any info on how to obtain 4M4UE0X1.86A.0011.P10 for an Intel® MU440EX Motherboard please post!
Thanks in advance!
I need Intel® MU440EX Motherboard BIOS version 4M4UE0X1.86A.
I need to try the P10 version but I cannot find it through Intel.
Errors:
----------------------------------------------------------------------------
Cannot upgrade Flash BIOS
Hanging at flash update
Error: "(H48): Invalid reserved string in flash image header."
Error: "(H01): The flash data image read from disk was found to be not valid."
Error: "Flash update was unsuccessful."
BTW: this is a Packard Bell A950-6x6
Errors:
----------------------------------------------------------------------------
Cannot upgrade Flash BIOS
Hanging at flash update
Error: "(H48): Invalid reserved string in flash image header."
Error: "(H01): The flash data image read from disk was found to be not valid."
Error: "Flash update was unsuccessful."
BTW: this is a Packard Bell A950-6x6
You can not flash Intel BIOS on Intel OEM board. It can be done using the recovery jumper (see the FAQ), but at your own risk.
Patched and tested BIOSes are at http://wims.rainbow-software.org
UniFlash - Flash anything anywhere
UniFlash - Flash anything anywhere
Thanks for the tip, I missed those in the FAQ, in the WIMS site...I will try the methods out and post my results in hopes that others can benefit.
If anyone else has any tips, please post them.
Thanks again.
If anyone else has any tips, please post them.
Thanks again.
-
- The Hardware Archivist
- Posts: 6286
- Joined: Wed Mar 20, 2002 7:11 pm
- Location: Netherlands
- Contact:
4M4UE0X1.86A.0011.P10
Phoenix OEM codes (Intel = 86):
04 = Sony
05 = Micron
10 = Dell
11 = NEC
15 = Gateway 2000
17 = IBM
21 = HP
25 = Vobis
28 = Toshiba
I think you have 11 where it's 86 in the P10 version...
Phoenix OEM codes (Intel = 86):
04 = Sony
05 = Micron
10 = Dell
11 = NEC
15 = Gateway 2000
17 = IBM
21 = HP
25 = Vobis
28 = Toshiba
I think you have 11 where it's 86 in the P10 version...
Thanks to those that at least thought about my dilemma, I found that I could edit the bios files using Hex WorkShop.
Thanks to EdWin and this site; I edited the bis files to be "11" instead of "86" in: 4M4UE0X1.86A.0011.P10
Thanks to all that replied and the mods for a great forum, you really helped me out, now I have a whopp'n Celeron 400 LOL!!
(still better than the PII 266 that it was...)
Thanks to EdWin and this site; I edited the bis files to be "11" instead of "86" in: 4M4UE0X1.86A.0011.P10
Thanks to all that replied and the mods for a great forum, you really helped me out, now I have a whopp'n Celeron 400 LOL!!
(still better than the PII 266 that it was...)
-
- The Hardware Archivist
- Posts: 6286
- Joined: Wed Mar 20, 2002 7:11 pm
- Location: Netherlands
- Contact:
Yup, either that or use the recovery flash mode. You are also looking at the fantastic Intel logo screen on bootup then
Both methods will usually work with a few known exceptions (some Dell boards for instance).
Both methods will usually work with a few known exceptions (some Dell boards for instance).