Restore ORIGINAL BIOS on Gateway 420GR PC

Questions that don't belong in the other forums.
Post Reply
bdsmith63
New visitors - please read the rules.
Posts: 4
Joined: Tue Mar 28, 2006 9:27 pm

I posted this question about 2 years ago on this site, didn't really get anywhere and still want to know how I can restore to my ORIGINAL FACTORY BIOS that came on this PC? Any help would be greatly appreciated.

I have a Gateway 420GR PC with the Intel 915GAG motherboard. If I can give you a quick summary of what I have done, then my question(s) below:

1) Had some computer issues going on, was told I needed to upgrade my BIOS by a friend.
2) According to the Gateway website, the BIOS upgrade shown did not match what was on my current system.
3) Through online chat with Gateway, I ended up installing a BIOS upgrade from Intel's website
4) Of course, the familiar Gateway logo at boot up and all is gone, and everything runs fine, but a few issues I need direction on:

First of all, the overall fan speed is slightly higher than before under the original BIOS, it seems to run at a more constant rate, previously if I had several applications open and doing more on the PC the fan speed would intermittently increase or decrease and when the PC was fairly idle and a cool room the fan you could hardly hear, now it doesn't do that.

Also, I noticed when I put in STANDBY mode that the "G" that is usually illuminated and blinks doesn't light up at all. I know these are all special modifications from Gateway in their original BIOS.

My question is should I reinstall the Gateway BIOS, or is the current version from Intel working well on my computer and not going to cause my any problems to my motherboard? I think the overall PC runs faster and smoother, just except the fan speed is different than before.
edwin
The Hardware Archivist
Posts: 6286
Joined: Wed Mar 20, 2002 7:11 pm
Location: Netherlands
Contact:

as for the G, that is a custom thingy. As for the fans: try and get the dust out of your PC, that might help a lot.

As for putting a gateway bios on the board, you'll have to use the recovery restore procedure for that as the OEM string differs from what is on it right now.
edwin/evasive

Do not assume anything

System error, strike any user to continue...
bdsmith63
New visitors - please read the rules.
Posts: 4
Joined: Tue Mar 28, 2006 9:27 pm

Hi, thanks for the reply. So how do I do a recovery to the system? the only disk(s) that came with my PC are for a HARD DRIVE restore, nothing to do with the BIOS. I just want it back like it was!!!
Post Reply