Hi,
I'm searching some old Bios for an
Elitegroup UM8810paio 486-Board
I've maded it to run an Amd5x86 at 180mhz on this Board, stable
(thats possible because the UMC-Chipset supports 60mhz Fsb)
but there is an weird Problem, with the later Biosversions (3.2x),
it wont boot with 180mhz (at 200mhz it does well, Thats weird !, but it is not stable)
only with earlier Bios it runs, Version 2.1 is the latest before 3.x I have
I'm looking for Bios-Version between 2.1 and 3.0, if there any exist
there are Award, AMI and Phoenix Versions for this Board, so Version-numbers can be different
greets from Vienna,
Antz
ps: where the many Biosfiles to Download are gone, who are here at earlier Days of this Page ?
searching Bios for an 486 Board
All the known BIOS's founded by me:
http://www.supportbios.info/modelo.asp? ... &Idioma=EN
http://www.supportbios.info/modelo.asp? ... &Idioma=EN
More than 100,000 BIOS strings in my database just now!
http:/ /www.kuriaki.has.it/
http:/ /www.supportbios.info
------------------------------------------
Saludos desde Cancun, Mexico
KURIAKI
http:/ /www.kuriaki.has.it/
http:/ /www.supportbios.info
------------------------------------------
Saludos desde Cancun, Mexico
KURIAKI
Latest BIOS can be found here:
http://minkirri.apana.org.au/pub/win9x/ ... 81032j.exe
http://minkirri.apana.org.au/pub/win9x/ ... 81032j.exe
More than 100,000 BIOS strings in my database just now!
http:/ /www.kuriaki.has.it/
http:/ /www.supportbios.info
------------------------------------------
Saludos desde Cancun, Mexico
KURIAKI
http:/ /www.kuriaki.has.it/
http:/ /www.supportbios.info
------------------------------------------
Saludos desde Cancun, Mexico
KURIAKI
thx, I know, the 3.2x Versions (f,h & j) are 'everywhere' to find,
but with these Versions the Board wont boot with 180mhz setting (dont know why)
I could get my Hands on the Bios-Ver.3.1, but it is not working, this seems to be only for the Revision 2.x of the Board (which I have 1.1)
maybe a silly Question, how can I download something from your Site ?
seems there are no Links
but with these Versions the Board wont boot with 180mhz setting (dont know why)
I could get my Hands on the Bios-Ver.3.1, but it is not working, this seems to be only for the Revision 2.x of the Board (which I have 1.1)
maybe a silly Question, how can I download something from your Site ?
seems there are no Links