The burning BIOS question

Questions that don't belong in the other forums.
Post Reply
huegee
New visitors - please read the rules.
Posts: 1
Joined: Wed Apr 10, 2002 4:49 pm

So I'm going to fire up my old 486SX. Instead of loading a drive overlay on the 2 gig HDD I decided to update the BIOS. The MOBO is a EFA Corp, model 4DMU-HL3S with BIOS Ver. 2 10/21 '93. I downloaded the last known update 3s-49-1.rom which adds LBA support and it tells me "EPROM BIOS data only, Not flashable".
So my question is: has anyone burned an EPROM for a BIOS update?
Is this .rom file ready to load on the chip or does it need to be converted to something else before loading? I have access to a EPROM programmer. Is it a matter of buying a new EPROM, learning the programmer and loading my 3s-49-1.rom file?
I know I can buy another MOBO or add a card with its own BIOS for the HDD or just add the overlay to the HDD but this seems like a bigger challenge. Does anyone have any advice or tips to help me do this?
PS. If I can find a cheap overdrive for the 486 I'm going to add it.
ajzchips
El cheapo dude
Posts: 3048
Joined: Sat Mar 23, 2002 12:41 pm
Location: Madrid, Spain

I've had several BIOS images (mobos and VGA) flashed on EPROMs at electronics shops (external programmer). It does work.
Post Reply