BIOS Updates forum

Hey thanks for staying on top of this thread! I found that in the normal bios, but when I go to set it, the setting resets. This is due to the bad cmos battery holder. When I popped the bios into modbinv6, I couldn't make it the default setting. So I was reaching out to this community to see if ther...

As it stands, nothing can be stored due to the battery issue, so that shouldn't be taken into consideration right? I appreciate your time by the way! http://www.aopen.com.tw/userdownload_List.aspx?RecNo=11133&Model=MP915-B That is the download page, and there are several download links at the bottom...

So does that confirm that there is no way to rebuild/mod the bios with it as default, then flash it? (it being halt on no errors)

Sorry, I changed my first post so many times to make it more clear, that I left that out.

It's not the battery, it's the battery holder.

I have put in two known good and tested batteries.

The motherboard is outside the warranty date.

Hello! I have the Aopen MP915-B MiniPC which uses the Phoenix AwardBIOS v6. If the power is cut 100% from the computer I have to press F1 the next time it's plugged in. This is an issue because I'd like to install it in my car. I am trying to see if there is a way to bypass the: Checksum Error: Defa...