uniflash success. but computer won't post!!!!!!!

Discusses BIOS flashers and utilities from Award, AMI and Uniflash
Post Reply
gch3
New visitors - please read the rules.
Posts: 4
Joined: Fri Jan 17, 2003 6:06 am

Hot swapped chip and used uniflash but now computer won't boot. The system comes up and cdrw lights then hd lights but it goes back and does the same again and again. K7s5a board, xp1800+, 512mb ddr2100 and gforce 2 card. What am I doing wrong. Put back in original chip and board boots fine. :oops: Broke prong on original chip and using staple to make contact. So far so good but it would be nice to get other chip working if possible. Any ideas or suggestions appreciated.
G. Harper
Denniss
BIOS Guru
Posts: 3153
Joined: Thu Mar 21, 2002 8:16 pm
Location: Near Hannover (CEBIT) Germany
Contact:

Flashed Bios with bootblock in Uniflash Advanced setting ?

Which Bios do you use for the K7S5A ?
gch3
New visitors - please read the rules.
Posts: 4
Joined: Fri Jan 17, 2003 6:06 am

Using cheepoman chb1129.rom bios oc'd at 143/143. Works fine on old chip.
Post Reply