need to find a manual for a SMT tx3 mother board

Request help finding jumper settings or a motherboard manual.
Post Reply
bike108
New visitors - please read the rules.
Posts: 3
Joined: Tue Apr 08, 2003 2:11 am

i need to find a manual for a smt tx3 motherboard. I am upgarding my processor from a 166mhz to a 200mhz and i need to know the jumper settings.
NickS
BIOS Bodhisattva
Posts: 3145
Joined: Fri May 03, 2002 10:34 am
Location: Thames Valley, UK

Is it this:
STM/Newtech P55TX3 ?
Image
http://web.archive.org/web/199807120758 ... p55tx3.htm?
A BIOS is at http://www.nix.ru/support/drivers.html? ... vendor=193
BIOS ID (bottom left): 03/05/98-i430TX-ALi5135-2A59ISE9C-00
BIOS message (top left): TX Pentium system BIOS Ver:TX3-5 3/5/1998
Last edited by NickS on Wed Apr 09, 2003 11:01 am, edited 1 time in total.
bike108
New visitors - please read the rules.
Posts: 3
Joined: Tue Apr 08, 2003 2:11 am

This is the right motherboard if u have any info let me know
NickS wrote:Is it this:
STM/Newtech P55TX3 ?
Image
http://web.archive.org/web/199807120758 ... p55tx3.htm?
A BIOS is at http://www.nix.ru/support/drivers.html? ... vendor=193
BIOS ID (bootom left): 03/05/98-i430TX-ALi5135-2A59ISE9C-00
BIOS message (top left): TX Pentium system BIOS Ver:TX3-5 3/5/1998
sapucaia
New visitors - please read the rules.
Posts: 3
Joined: Mon Jun 23, 2003 9:26 pm

Hi!

If its processor will not be none of these, accurately says the model that I pass jumper settings.


Intel 200MHZ Processor (66x3)

FS0 = 1-2
FS1 = 1-2
BF0 = 1-2
BF1 = 2-3
BF2 = X

Cyrix 6x86 / 6x86L P200 (75x2)

FS0 = 1-2
FS1 = 2-3
BF0 = 2-3
BF1 = 1-2
BF2 = 1-2

Cyrix 6x86MX(M2) P200 (66x2.5)

FS0 = 1-2
FS1 = 1-2
BF0 = 2-3
BF1 = 2-3
BF2 = 1-2

AMD K5 PR200 (60X3)

FS0 = 2-3
FS1 = 1-2
BF0 = 1-2
BF1 = 2-3
BF2 = X

AMD K6 200MHZ (66X3)

FS0 = 1-2
FS1 = 1-2
BF0 = 1-2
BF1 = 2-3
BF2 = 1-2
multitudo
New visitors - please read the rules.
Posts: 1
Joined: Tue Jul 17, 2007 5:57 am

Hi Sapucaia, i need the manual this motherboard. I have a k6 233 e a pentium 233. I need (66X3.5), (66X4), (66X4.5), (66X5) and (66X5.5) jumper settings. if possible? Thanks.
edwin
The Hardware Archivist
Posts: 6286
Joined: Wed Mar 20, 2002 7:11 pm
Location: Netherlands
Contact:

will not do more than 3.0x with any settings.
edwin/evasive

Do not assume anything

System error, strike any user to continue...
KachiWachi
The New Guy
Posts: 1451
Joined: Fri Mar 29, 2002 10:32 pm
Location: Pennsylvania, USA

edwin wrote:will not do more than 3.0x with any settings.
You are referring to the Intel CPU here...correct?
Post Reply