20GB Western Digital limiting my space to 8.4GB
Bios Date: 01/03/2003 S
Bios Id: 62-0103-001131-00101111-071595-SiS730S-M810LR7-H
AmiBios Version 1.21.06
Not much time in between the date there, but i havent partitioned the drive yet would it be more logical to just use drive overlay software and if so do i have to use one made for my hdd or are they all universal?
20GB: 62-0103-001131-00101111-071595-SiS730S-M810LR7-H
And make sure that MODE is set to LBA.
Patched and tested BIOSes are at http://wims.rainbow-software.org
UniFlash - Flash anything anywhere
UniFlash - Flash anything anywhere
-
- BIOS Guru
- Posts: 3153
- Joined: Thu Mar 21, 2002 8:16 pm
- Location: Near Hannover (CEBIT) Germany
- Contact:
Is the drive 1)detected as 8.4GB or 2) as 20GB and having only 8.4GB space ?
1) > Remove capacity limitation jumper on HDD
2) > Repartition your drive to full 20GB
http://radel.inet.net.nz/m810lmr.html
1) > Remove capacity limitation jumper on HDD
2) > Repartition your drive to full 20GB
http://radel.inet.net.nz/m810lmr.html
First in bios my drive is listed as 8455MB,I just took the hdd out and took a look at it didnt see any other jumpers other than the master,slave,cable select,a jumper that dosent say anything and one thats says pm2
-
- BIOS Guru
- Posts: 3153
- Joined: Thu Mar 21, 2002 8:16 pm
- Location: Near Hannover (CEBIT) Germany
- Contact:
http://www.westerndigital.com/
Enter the model numer o your HDD into the search option and then have a closer look onto the HDD jumpers - seems it's jumpered to 8GB
Enter the model numer o your HDD into the search option and then have a closer look onto the HDD jumpers - seems it's jumpered to 8GB