What Brand do i have???

Discusses BIOS flashers and utilities from Award, AMI and Uniflash
Post Reply
Berre
New visitors - please read the rules.
Posts: 8
Joined: Sun May 04, 2003 3:42 pm

Hello... Like many of you guys i f**ked up my bios by not read to carefully.
Anyway when i try to flash back i have to enter what chip, brandm type it is, so
my question to you all out there is: What is the bios info. i have on my mb...

My MB is a MSI KT333-ULTRA 2 ( Bios AMI MS-6380E )

... Clueless :( Thankful 4 all info possible..
Berre
New visitors - please read the rules.
Posts: 8
Joined: Sun May 04, 2003 3:42 pm

Hmmm... Checked the chip and it says:

W49F002UP12B , so can it be 49F002U_V3 ???
The only altern. that look the same in AMIFL827.EXE Ver. 8.27.38

When i try to flash it says:
Flash ROM cannot be correctly programmed....
Any clue? Can i force it some how???
NickS
BIOS Bodhisattva
Posts: 3145
Joined: Fri May 03, 2002 10:34 am
Location: Thames Valley, UK

The Winbond application note says that it is a replacement for W29C020C, with the difference that Pin 1 is now defined as Reset where it was Not Connected. You could try Uniflash....
Berre
New visitors - please read the rules.
Posts: 8
Joined: Sun May 04, 2003 3:42 pm

It says... Organistion: ( N/A )
So i can´t do a thing with uniflash... :(
Berre
New visitors - please read the rules.
Posts: 8
Joined: Sun May 04, 2003 3:42 pm

Well... Guess i´m off too the store and buy a new MB.... Thx anyway...
Denniss
BIOS Guru
Posts: 3153
Joined: Thu Mar 21, 2002 8:16 pm
Location: Near Hannover (CEBIT) Germany
Contact:

Let your flashrom be reprogrammed or get a new one at your store or www.badflash.com
Post Reply