can anyone help me with a bios update for the following GVC mother board
GT693VA the bios i have exhisting is 2A6LGGAC-00
I cant seem to get to the GVC website
thanks
Bios update for gvc mother board
12/07/1999-693A-596B-W97-2A6LGG5AC-00
BIOS VER:1.04 (#21051)
http://www.bcmcom.com/tech/GT693VA/bios/gt693va-104.zip
BIOS VER:1.04 (#21051)
http://www.bcmcom.com/tech/GT693VA/bios/gt693va-104.zip
Patched and tested BIOSes are at http://wims.rainbow-software.org
UniFlash - Flash anything anywhere
UniFlash - Flash anything anywhere
It's the latest BIOS from BCM - a company somehow connected with GVC (now dead).hey what exactly is this link that you have posted
Patched and tested BIOSes are at http://wims.rainbow-software.org
UniFlash - Flash anything anywhere
UniFlash - Flash anything anywhere
almost 2 months newer then the BIOS you have now.........Rainbow wrote:12/07/1999-693A-596B-W97-2A6LGG5AC-00
BIOS VER:1.04 (#21051)
http://www.bcmcom.com/tech/GT693VA/bios/gt693va-104.zip
Compaq-Fu Master
when i open the file it says to save a two files to a floppy disc which it gives a specific name for those files however when i open those two specific files arent in the folder that ive saved to disc differant names im kind of confused as to which files to save to the disc
I DONT WANT TO SAVE THE WRONG ONES AND RUIN THE BIOS ALTOGETHER
I DONT WANT TO SAVE THE WRONG ONES AND RUIN THE BIOS ALTOGETHER
-
- The Hardware Archivist
- Posts: 6286
- Joined: Wed Mar 20, 2002 7:11 pm
- Location: Netherlands
- Contact:
In the examples given here, we use the file name newbios.bin to represent the new BIOS and the file name oldbios.bin to represent the old BIOS. Note that these file names are only examples to help you understand the updating process.
edwin/evasive
Do not assume anything
System error, strike any user to continue...
Do not assume anything
System error, strike any user to continue...
So what you are saying is that when it ask you to type the file name i should type the numbers of the bin file (21051104.bin) on that line
also whats the easiest way to copy those two files to a floppy sorry im not familiar with copying files to floppy disc's but id appreciate the help thank you
also whats the easiest way to copy those two files to a floppy sorry im not familiar with copying files to floppy disc's but id appreciate the help thank you
Oh and also whats the flash.bat file and what do i do with that
Essentially i have 4 files that ive downloaded the bin file the awdflash.exe file the awdflash html file and the flash.bat file i know that the html file is the directions the bin file seems to be the (new bios) file which is predated to my own bios and the flash.bat file
Please help me!!!!!!!!!!!!!!!!!!!!!!!!!
im feeling retarded because im worried about this upgrade i apologize for the continued questions i just want to be completely sure before i do this upgrade
Thanks so much for the patience
Essentially i have 4 files that ive downloaded the bin file the awdflash.exe file the awdflash html file and the flash.bat file i know that the html file is the directions the bin file seems to be the (new bios) file which is predated to my own bios and the flash.bat file
Please help me!!!!!!!!!!!!!!!!!!!!!!!!!
im feeling retarded because im worried about this upgrade i apologize for the continued questions i just want to be completely sure before i do this upgrade
Thanks so much for the patience
-
- The Hardware Archivist
- Posts: 6286
- Joined: Wed Mar 20, 2002 7:11 pm
- Location: Netherlands
- Contact:
Once you have made a bootable floppy (format, check the "copy system files" checkbox and format), copied the 4 downloaded files to it, start the system from the floppy. It will show you a black screen with A:\>
now type:
flash 21051104.bin
followed by an <Enter>. It will now flash the bios, wait until it says it is completed and you can power off/reboot your system. Remove the floppy from the drive. Reboot your system.
now type:
flash 21051104.bin
followed by an <Enter>. It will now flash the bios, wait until it says it is completed and you can power off/reboot your system. Remove the floppy from the drive. Reboot your system.
edwin/evasive
Do not assume anything
System error, strike any user to continue...
Do not assume anything
System error, strike any user to continue...
Ok perhaps im not being clear
1. How do i copy only the two files needed on a floppy disc to that disc
2. the file does not say flash 21051104.bin nor does it instruct it to type it that way so with you message to type flash then the file name is confusing me more rather than assisting me the instructions state to type the file name which is 21051104.bin only
3. There are 4 files in the bios version that i copied to my pc the instructions tell me to copy "2" of those files to a bootable floppy disc
the 4 files are as follows
1. 20151104.Bin
2. Awdflash.exe
3. Awdflash.Htm
4. Flash.bat
until i am perfectly clear on how to install this bios update im not going to install the update additionally there is a jumper on my bios which also needs to be changed which after im clear on the rest of this im gonna need some assistance on changing that jumper to the correct setting im sure
1. How do i copy only the two files needed on a floppy disc to that disc
2. the file does not say flash 21051104.bin nor does it instruct it to type it that way so with you message to type flash then the file name is confusing me more rather than assisting me the instructions state to type the file name which is 21051104.bin only
3. There are 4 files in the bios version that i copied to my pc the instructions tell me to copy "2" of those files to a bootable floppy disc
the 4 files are as follows
1. 20151104.Bin
2. Awdflash.exe
3. Awdflash.Htm
4. Flash.bat
until i am perfectly clear on how to install this bios update im not going to install the update additionally there is a jumper on my bios which also needs to be changed which after im clear on the rest of this im gonna need some assistance on changing that jumper to the correct setting im sure
-
- The Hardware Archivist
- Posts: 6286
- Joined: Wed Mar 20, 2002 7:11 pm
- Location: Netherlands
- Contact:
the reason I say this is to make it easy for you not to miss a file.Once you have made a bootable floppy (format, check the "copy system files" checkbox and format), copied the 4 downloaded files to it, start the system from the floppy.
the flash.bat file contains additional instructions used when flashing.
What I have done in my previous post is spoon-feeding you the exact instructions, what to type, what to do and so on.In the examples given here, we use the file name newbios.bin to represent the new BIOS and the file name oldbios.bin to represent the old BIOS. Note that these file names are only examples to help you understand the updating process.
edwin/evasive
Do not assume anything
System error, strike any user to continue...
Do not assume anything
System error, strike any user to continue...