My computer's dead any ideas?
Hey I have a 233 (not sure which one either intel mmx, amd or cyrix) I have gone through it over and over cleared the cmos, checked to see if ide cable was in right, ram in right slot all jumpers are good throughout the board it looks fine. However I can't get it to start before it stopped working some files would go missing himem.sys to be exact I remember my friends comp (which had a warped socket370) the computer would power up and load into windows half the time and the other half it would freeze at some point. Although with this board here there is power going to everything except no video at all so as a test I took out the ram and no beeps so im beginning to think that the CPU is shot, but then again I haven't had much experience in telling so or not. So if anyone has any suggestions please post.
I thought that myself but I used a Multimeter and everythings getting the right voltage, all the LEDs are working fine, the fans are good and so are the drives so that kinda rules out the PSU. So as of now I think it's dead as well.
-
- The New Guy
- Posts: 1451
- Joined: Fri Mar 29, 2002 10:32 pm
- Location: Pennsylvania, USA
The main PSU could be functional, but are that CPU regulators functional? Check for proper VCore and VIO at the regulators, or at the CPU socket.
CPU - DFI 586IPVG, K6-2/+ 450 (Cyrix MII 433), i430VX, 128MB EDO.
BIOS patched by BiosMan (Jan Steunebrink).
BIOS patched by BiosMan (Jan Steunebrink).
Yeah she actually got the computer back and brought it to some place to see if they have any luck figuring out what's goin on as I checked it over 3 or 4 times with no luck so I'm actually glad to be rid of it but thanks for the posts