30GB: 12/11/2000 SIS 630-P6STP-FLC-00

BIOS update, EIDE card, or overlay software? (FAQ Hard disk recognition)
Post Reply
meskalin
New visitors - please read the rules.
Posts: 1
Joined: Thu Oct 16, 2003 12:29 am

i have a Fujitsu MPG330AT 30745Mb HD my system won't recognize it at all.

ECS P6STP-FL Board
Award 6.00 PG
SIS 630-P6STP-FLC-00
P6STP-FL ver 2.2 12/11/2000
celeron 700 10.5x66
onboard gfx,lan,sound

does not support INT-13h Extension

i have uptated my bios to version 2.2f but it still dont work.
ajzchips
El cheapo dude
Posts: 3048
Joined: Sat Mar 23, 2002 12:41 pm
Location: Madrid, Spain

Version 2.2f is of 2001. It would be quite surprising the BIOS really didn't support large hdds.

Our utility states: "BIOS already supports HDDs over 32GB & 64GB"
janpopan
Chip off the ol' block
Posts: 82
Joined: Tue Apr 02, 2002 10:08 pm
Location: Berlin
Contact:

It is a AWARD 6.0 - the 32gb & 64 GB Bugs are only in version 4.51.

MfG
Jan
for 32 GB+ Bios look here

http://www.jan-hill.com/bios.html
edwin
The Hardware Archivist
Posts: 6286
Joined: Wed Mar 20, 2002 7:11 pm
Location: Netherlands
Contact:

Which means one of two things:

1) jumpers not set right on the drive (remove the 32GB clipping jumper, see instructions on drive) or bios not set for autodetect

2) harddisk defect.
edwin/evasive

Do not assume anything

System error, strike any user to continue...
Post Reply