Hello
Does anyone know if the QDI Advance 9 motherboard supports the following celeron coppermine processors running at 566MHz
1. SL3W7
2. SL46T
Thanks for any info [/url]
QDI Advance 9 motherboard
-
- The Hardware Archivist
- Posts: 6286
- Joined: Wed Mar 20, 2002 7:11 pm
- Location: Netherlands
- Contact:
maximum multiplier is 8x so 533. the 566 has a bus/core ratio of 8.5
although the voltage is OK (the board can use 1.5V core processors), chances are it doesn't recognize it as such.
although the voltage is OK (the board can use 1.5V core processors), chances are it doesn't recognize it as such.
edwin/evasive
Do not assume anything
System error, strike any user to continue...
Do not assume anything
System error, strike any user to continue...
I've successfully tested Celeron 600 in Advance 5/133 board with the latest BIOS.
What's more, there's clearly written on that QDI page:
What's more, there's clearly written on that QDI page:
Support Intel Celeron CPU at 300A/333/366/400/433/466/500/533/566/700/800MHz
Patched and tested BIOSes are at http://wims.rainbow-software.org
UniFlash - Flash anything anywhere
UniFlash - Flash anything anywhere
Don't worry. Multiplier settings for the P2/P3/Celeron are useless, since you can only alter them on "unlocked" versions or engineering samples.
Your cpu will work at the factory-set multiplier, even if it's 9.5, 13, 27, whatever.
Your cpu will work at the factory-set multiplier, even if it's 9.5, 13, 27, whatever.