My problem is as follows:
I bought a new CD-Rom device (Lite-On) and connected it with my computer. When I turn on the computer, I see the type of processor, the memory is being checked, it writes the neme of HDD, it writes the model of CD-rom device (LTN-483L) and it stops. I can go into BIOS but the OS won't boot. If I unpllug the CD-rom everything works. Everything works fine with my old 8xspeed NEC CD-rom device. What is the problem? I wanted to Flash BIOS but I'm not shure what is the name of BIOS flash file. All I could find was Flash file named GA586ATV3/4. Could you help me?
Here is the mother board type again:
GA-586ATV 2A59GG0AC-00 intel 430VX 3PCI 2ISA 4SIMM UMC8669
I'm looking for your fast reply,
Thanks
GA-586ATV
Do you have the master/slave jumpers set correctly? Post full BIOS ID string.
Patched and tested BIOSes are at http://wims.rainbow-software.org
UniFlash - Flash anything anywhere
UniFlash - Flash anything anywhere
-
- Mobo-Fu Master
- Posts: 119
- Joined: Mon May 13, 2002 11:20 pm
- Location: Ottawa, Ontario, Canada
- Contact:
Well definately check the Master Slave relations, also if the cable is twisted (Red line to Pin1). Its also possible the CDROM could be bad.
Also found:
GAATV123.rar
102538
[28/09/1998]
GIGABYTE 430VX BIOS Ver.1.23 04/17/97-i430VX,UMC8669-2A59GG0AC-00 Intel 430VX PCI BIOS for Pentium(R) Processor Ver.1.23
http://sky.net.ua/support/drivers.php?p ... _BIOS%2FP5
Also found:
GAATV123.rar
102538
[28/09/1998]
GIGABYTE 430VX BIOS Ver.1.23 04/17/97-i430VX,UMC8669-2A59GG0AC-00 Intel 430VX PCI BIOS for Pentium(R) Processor Ver.1.23
http://sky.net.ua/support/drivers.php?p ... _BIOS%2FP5
"Imagination is the only weapon in the war against reality." -Jules de Gautier
-
- Mobo-Fu Master
- Posts: 119
- Joined: Mon May 13, 2002 11:20 pm
- Location: Ottawa, Ontario, Canada
- Contact:
Also found the update your aware of here:
http://www.gigabyte.co.jp/support/dis58 ... kdis586atv
I believe it supports your model, but I cannot be 100% sure.
http://www.gigabyte.co.jp/support/dis58 ... kdis586atv
I believe it supports your model, but I cannot be 100% sure.
"Imagination is the only weapon in the war against reality." -Jules de Gautier